|
|
|
|
AbleComm: Panasonic Phone Systems & Phones User Guide for Panasonic Digital Systems © 1997-2003 AbleComm, Inc. All Rights Reserved. user-digital 8/22/03 Email Newsletter AbleComm.com Home AbleComm.info Home Call toll-free, 1 888 ABLE 999 ORDER ONLINE |
|
|
|
|
| Copy & modify for your own
use. Works fine in 3 columns with 1/2-inch borders & 12-point type. |
Feature codes below are for the KX-TD816 and
D1232. Some may have to be changed for the KX-TD308. |
| INTERCOM DIRECTORY 101.. 102.. 103.. 104.. 105.. 106.. 107.. 108.. (add more if necessary) ----------------------------------------------- |
DOOR INTERCOM If someone calls from a door intercom, there will be a distinctive burst of three rings from all phones that are programmed to respond to door calls, and display phones will show "Door Phone 1, or "Door Phone 2", etc. Just pick up a handset or press SP-PHONE, and talk. If your phone stops ringing before you have a chance to answer, dial 311 for the front door, or 312 for the back door, or 313 etc. if you have more doors.. PAGING If you don't know where someone is, you can make an announcement to all of the phones, instead of searching room-by-room. Simply pick up the handset and press INTERCOM (if that button is not already illuminated) and dial 330. You will hear a beep, and then you can make an announcement, such as "Bill, Charlie is on line one." If you want to have a conversation rather than just make an announcement, dial 330 and say "Bill, please call 43." 43 is the response to 330. If someone hears the original announcement and dials 43, he will be connected to the person who dialed 330, and the speakers in other phones will be shut off. REDIAL Your system may have the ability to recognize a busy signal, and then hang up and dial again. Try to get in the habit of dialing hands-free (using the speakerphone). If you get a busy signal, press REDIAL. The phone will try the call again immediately; and if another busy signal is encountered, it will start a sequence of multiple calls until the call is answered. |
If the call is not answered within about 15 minutes, the
redialing will stop, but you can restart it by tapping REDIAL. The REDIAL button can also be used for an individual attempt to call the previous number you dialed. Just tap REDIAL. CONFERENCE You can speak with two other people outside the house at the same time. You can do this with two incoming calls, two outgoing calls, or one of each. After speaking to someone on one line, press CONF, and speak to someone on the other line and press CONF again. This will put the three of you together. At the end of the conference, if you want to speak to just one person, press the line button for the person you want to keep, and the other call will be dropped. SINGLE-LINE PHONES The first dial tone you hear with a single-line phone is usually INTERCOM dial tone. You can dial another phone within the house or business, or press 9 to get dial tone for an outside call. You can put a call on hold and switch to intercom by pressing the FLASH button, or hang up briefly. You can get a call that was put on hold elsewhere, by dialing 53 plus the line number, with two digits (e.g.: dial 5302 for line #2). You can also dial 51 plus the intercom number where the call was put on hold. |
 |
|
| Call us toll-free, 1 888 ABLE 999 | |
010